Click image to view full size image
Introduction
The ultrasonic water meter adopts the pure electronic ultrasonic measurement principle, with high measurement accuracy and wide range ratio. The actual water consumption can also be accurately measured in the case of low flow rate of the pipe network. There are no mechanical moving parts such as impellers in the pipe section of the water meter, so there is no pressure loss and no wear. The electronic part adopts ductile iron shell, and the protection level reaches IP68 level. The ultrasonic water meter is powered by a lithium battery, and the battery life is more than 10 years, which effectively ensures the service life of the product.
Features
1. Micro-power design, high-capacity battery power supply (battery life ≥ 10 years);
2. Wide range ratio, low starting flow, high accuracy level, good stability, can be used for water leakage detection;
3. After the data measurement and control terminal is selected, the pipeline network assessment, pipeline network monitoring and analysis (SCADA, DMA) can be realized;
4. Alarm for abnormal water use and pipe network abnormality;
5. When the pipeline is full, it can be installed at any angle, and the measurement accuracy will not be affected;
6. Data freezing function, the freezing frequency can be set in advance and packaged and uploaded;
7. IP68 design of the whole machine;
8. Forward and reverse measurement, suitable for measurement environment such as ring pipe network.
http://www.shmeter.com/